The CE conformity marking (logo) shall consist of the initials "CE " in the form shown below;

If the CE marking is reduced or enlarged the proportions given in the above graduated drawing must be respected.
 - The various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5 mm;
-The affixing of markings on the products which are likely to deceive third parties as to the meaning and form of the CE marking shall be prohibited. Any other marking may be affixed to the products or the data plate provided that the visibility and legibility of the CE marking is not thereby reduced;
Attention:
It should be noted that the C and E are not formed by perfect semi-circles, i.e. the top and bottom arms extend one square beyond the semi-circles, and the middle arm of the E stops one square short.

VERIFY CERTIFICATION

Check validity of the certificates issued by us.You will need to have to put the certificate number  below and click  "Certificate Search " button.In case of any problem, Eurocontrol S.A. can also  be validated  by sending e-mail to  This email address is being protected from spambots. You need JavaScript enabled to view it. We will respond quickly (within 48 hrs.) to your requirements

Login Form

Eurocontrol-S-A

International NB for Certification & Inspection

Template Design:Dima Group